Energy Star Application Techniques
Spray application of Energy Star heat reflective paints with airless spray equipment.
Spray application of Energy Star AC3 IR Grey Primer.
1 Coat Required - Anti-corrossive bonding primer
Spray application of Energy Star AC3 IR Grey Primer with an airless spray gun. Use a 621 spray tip with an airless that deliivers at lease 3.8 ltrs of product per minute. Spray straight from drum with no added water.
Spray application of Energy Star Metalflex PCM - 1st Coat
2 Coats required - heat reflective protective topcoat.
Spray application of Metalflex PCM with an airless spray gun on a metal roof. Use a 621 or a 623 spray tip with an airless that deliivers at lease 3.8 ltrs of product per minute. Add up to 1.5 ltrs of water per 20 ltr drum of product.
Spray application of Energy Star Metalflex PCM - 2nd Coat
2 Coats required - heat reflective protective topcoat.
Spray application of Metalflex PCM with an airless spray gun on a metal roof. Use a 621 or a 623 spray tip with an airless that deliivers at lease 3.8 ltrs of product per minute. Add up to 1.5 ltrs of water per 20 ltr drum of product.
Spray application close up - 1st Coat
Energy Star Heat reflective topcoat.
Spray pattern close up of a 623 airless spray tip. Overlap during spray should be 50% of fan width which insures full wet cover.
Close up of wet film- 1st Coat
Energy Star Heat reflective topcoat.
Spray pattern close up of a 623 airless spray tip. Overlap during spray should be 50% of fan width which insures full wet cover.