EC-2000 Extreme Low Sheen

  • $0.00
    Unit price per 

Only 0 left!

Description

EC-2000 Extreme is a Crack Bridging 100% acrylic, elastomeric wall coating that provides the elongation and elastic recovery necessary to bridge continually moving cracks in a masonry wall.  Cracks are easily bridged during initial application and remain bridged throughout the worst ravages of cold winters and hot humid summers and maintains a positive waterproof seal to masonry and texture finished walls.

The product has high resistance to Carbon Dioxide Permeability making it ideal for seafront and inter-city masonry wall applications. The cured film is tough and highly elastic and incorporates topical strength anti-mould and mildew protection that will resist film growth even throughout Australia’s tropical regions such as far North Queensland.

Principal Uses

Masonry and texture finished walls, pre-cast concrete, cement sheet, rendered walls, brick and concrete block.  Do not use this product for any other purpose than that specified in our literature.

Product Data

Clean-up                      Water

Coverage

Theoretical Spread Rate @ DFT, (30 microns dry)                  13.86 m2/ltr

Spread rate at recommended D.F.T (300 microns dry)                  1.38 m2/ltr

Spread rate at recommended D.F.T (150 microns dry)                   2.76 m2/ltr

Masonry                         2.5-2.76 m2/ltr                                           (single coat)

Brick                               2.5-2.76 m2/ltr                                           (single coat)

Concrete Block               2.5-2.76 m2/ltr                                           (single coat)

Cement Sheet                 2.5-2.76 m2/ltr                                           (single coat)

Textured Surface             2.5-2.76 m2/ltr                                           (single coat)

Recommended Thinners                       Water

Thinning

Up to 20 % for Spray applications

Volume Solids.                                     46.2 %

Recoat Time                                         Touch dry in 50 minutes / Recoat 4 hours

Gloss Level                 6.7% @ 60 degrees

V.O.C                                              <25 Gl

QUV Accelerated weathering                

(3972 hrs UVB / Moisture 60 deg C   >78 % of original gloss retained Colour (Black)

 

Water Transmission Resistance      <24 g/24h/m2/kPa  (AS/NZS 4548.5-1999)

 

Water Vapour Transmission         

140.9 g/m2/24 hour: 

(AS/NZS 4548.5-1999)

 

Elongation @ 25 deg / C               641 %

Tensile Strength    4.278 mpa, max strain

Specific Gravity                              1.172

PVC                                                  26%

 

🔽  Product Data Sheet

🔽  Safety Data Sheet