high performance Sealers
primers & undercoats
Acrylic Primer Undercoat is a low VOC,
low odour, ultra-premium, acrylic primer undercoat with superior hiding power, substrate fill and adhesion.
Wallmaster Acrylic Primer Undercoat
Q; Priming MDF will lower surface suction and provides the ideal surface to apply modern low VOC water-based trim enamels.
low VOC-Low Odour
Asthma & Allergy Friendly.
- ULTRA STRONG HIDING POWER
- High Opacity Base Coat
- Excellent fill of sanded flushing
- Smooth and Even to Apply
- LOWERS SURFACE SUCTION
- AUSTRALIAN MADE AND OWNED
WALLMASTER Acrylic Primer Undercoat is a low VOC, low odour, ultra-premium, acrylic primer undercoat. It has superior hiding power, adhesion and surface fill especially when used on joint flushing and repairs of new paper-faced boards. The product glides on smooth and evenly during application and has excellent fill and pigment binding capacity of sanded fillers. The product provides a strongly adhered, high opacity base coat for good gloss hold-out of the subsequent finish coats. The product is fortified with unique flow, wetting and levelling agents that provide excellent ease in brush, roll or spray application, resulting in a smooth and uniform finish.
Interior, paper faced boards, pre primed MDF, plaster, fibrous plaster, cement sheet, masonry and brick. Do not use this product for any other purpose than as specified in our literature.
Coverage Up to 14 m2/litre, surface dependent.
Volume Solids 38%
Touch dry 30 minutes
Recoat 2 hours
Gloss Level 3.5 % @ 60 degrees
V.O.C <38 gL / Meets the A.P.A.S. (Australian Paint Approval Scheme), Low VOC targets.
WHY CHOOSE WALLMASTER
australian made and owned
We are proud of what we make and that our products can carry the Australian Made and Owned Logo.
Independent third party accreditation for heat reflective coatings provides our clients' assurance that the Energy Star products they use will perform as stated.
The Good Environmental Choice Label is the only environmental labeling program in Australia which indicates the environmental performance of a product from a whole of product life perspective for consumer goods.