Armatex R40 Roll-On FTC
Armatex R-40 Roll-On FTC is a 100% acrylic, water reducible, texture paste. The product is formulated to provide a ready to use material that can be roll applied straight from the drum to a suitably prepared vertical wall. The final result is a unique, non-granular textured finish with a uniform stippled profile that adds an architecturally pleasing appeal to any masonry structure.
R40 roll-On fTC
(Fine Texture Cover)
A tight stippled profile with a profile depth of approximately 1.5-2.5 mm
- High Grade Marble AGGREGATES
- Very strong substrate adhesion.
- highly flexible
- EXCELLENT water resistance
- Rapid cure and bond strength
- smooth and uniform APPLICATION
- Excellent RESISTANCE to alkali
Armatex R-40 Roll-on FTC is a 100% acrylic, water reducible, texture paste. The product is formulated to provide a ready to use material that can be roll applied straight from the drum to a suitably prepared vertical wall. The final result is a unique, non-granular textured finish with a uniform stippled profile that adds an architecturally pleasing appeal to any masonry structure.
The applied finish is a medium stippled profile with a profile depth of approximately 2-3 mm. Common to all Armatex finishes are carefully graded washed and dried sands that are blended with Astec second generation acrylics to form a flexible product that is extremely well bound and will not crumble even when it is rolled to a fine edge. Armatex provides a strongly adhered film with outstanding exterior durability.
Armatex has undergone rigorous field and laboratory test programs that guarantee the tradesman a product that has well refined application properties for fast and trouble free applications and uniform end result.
• Firewall Render
• PVC Permanent formwork with Firewall Render
• Cement sheet permanent formwork.
• Cement Sheet cladding.
• Hebel Block & Power Panel XL.
• All AAC Panels and block.
• Masonry substrates.
• Concrete block.
• Wire cut clay block.
• Unglazed brick.
• Cast in place concrete.
• Low gloss well adhered painted surfaces.
Gloss Level Matt
Recommended Thinners Water
Touch Dry 1 hour
Dry @ 25 deg C, 50% RH 2 hours
Theoretical spread rate [@ 900 mic D.F.T.] 1.47 m2/ltr
Abrasion resistance Excellent
Solvent resistance [Full top coated system]
Alcohol No reaction
Salt water No reaction
Distilled water No reaction
Diluted Caustic Soda No reaction
Detergent solution No reaction
Dilute 5% mineral acid No reaction
Accelerated weathering [2000 hrs 313 U.V.B. Pass]
Excellent Specific Gravity 1.665
Solids volume 62% V/V
P.V.C. 72% V/V
Moisture vapour transmission 42.7g.m2/24hrs
[Method ASTM E96-1966 Full top-coated system]
WHY CHOOSE ARMATEX
australian made and owned
We are proud of what we make and that our products can carry the Australian Made and Owned Logo.
Independent third party accreditation for heat reflective coatings provides our clients' assurance that the Energy Star products they use will perform as stated.
The Good Environmental Choice Label is the only environmental labeling program in Australia which indicates the environmental performance of a product from a whole of product life perspective for consumer goods.